We have all seen these bookshelves, maybe we even have one in our home?
I made mine over to look like a Ballard’s knockoff!
Here are the items you will need:
- 4 short legs of choice, plus plates
- Paint of choice
- Wax or top coat of choice
- Fabric of choice to go on back behind shelving
- Measuring tape
- Sharp Scissors and Box Cutter
- Spray Adhesive, and small rolling pin or something to smooth out fabric
I purchased this basic bookshelf at my local Goodwill store for $5.
I then purchased four bun feet from Home Depot for about $8 each.
To upgrade the bookshelf, turn it over and add the feet plates, they are easy to drill in and then screw in the legs. Both are usually found in the “Trim” department of your local Home Improvement Store.
While it was still upside down, I painted the entire piece in ASCP, “Graphite”.
When dry, I righted it and painted the entire piece in a 2nd coat. Skipping the back, (this is where the fabric will go). When 2nd coat was dry I waxed the entire piece with Mylands Dark Brown Antique Wax. I like to use the Dark Wax with the Graphite, it seems to work really well together.
Turn the bookshelf open side down, lay the fabric of choice on the back and cut around to fit. (or be more accurate in measuring, which I am not)
Turn bookshelf back over and spray back with good spray Adhesive (I like Elmer's brand because I can move stuff around to fit before it sets). Use roller to smooth out fabric and make sure it adheres well.
If it is not an exact fit, go around edges with "Box Cutter" to "score" the fabric. Gently lift up and trim excess fabric, then repeat light spray and roll.
Linking up with these lovely blogs: