Le Dresser turned bookshelf
Yesterday, I showed this lovely lady, missing some of her drawers:
I wanted to take out the top drawer supports (the drawers were MIA).Â Sometimes they “pop” right out, sometimes you have to bring in the big guns.
Â I laid it down flat and brought in my reciprocating saw, cut through the wood where it was attached at the front of the dresser.Â
I laid it down flat and brought in my reciprocating saw, cut through the wood where it was attached at the front of the dresser.Â Â
Once I cut through the wood, I had to use a Hammer and Chizle to pop out the rest.Â Now I was left with this:
This is what I took out, the guts:
Next, I measured the inside, left side, right side, and bottom, and cut pieces the same dimensions with my table saw. Be sure to mark each piece, so you don’t put it together wrong.Â (Not that I have ever done this or anything…..)
Since the bottom piece needed to have a curve to match the shape of the dresser, I laid it down on top of a drawer, and traced the shape, then I used a Jig Saw to get the right shape.Â I clamped the wood to the top of my work table so I wouldn’t have to hold the wood and try to cut.Â (No one is ever around to help when I do these things….)
If you aren’t comfortable with power tools, a jigsaw is a great place to start, the blades are small, you can control it very well, and you can make any shape you want.Â They are lots of fun.Â Â
I then glued one side at a time to the bottom, using Gorilla Wood Glue, my go to glue.Â Let the glue set, then secured it with wood screws.
Now I have a shelf!
Â I “dry fit the piece into the dresser to make sure it fit, then sanded and primed the pieces.
I put the shelf back in the dresser, filled in any blemishes with “Wood Filler”.Â Measured my trim, and put it down the left and right side of the box, to hide any gaps that would show.Â Â
Painted the entire piece with Sherwin Williams “Tricorn Black” in semi gloss.Â Lightly distressed the edges with a 320 grit sand paper and finished with several coats of Minwax “Polycrylic”.
Now we are all ready for new service! Â
Linking up with these lovely blogs: