How to make anything look like real wood
It’s here! The easiest way to learn How To Make Paint Look Like Wood.
**This post is my most pinned post! It has been pinned literally millions and millions of time, thank you! Please stick around, visit my Projects Page and see what else you might like to check out and try.
I enjoy sharing products I love with you and I hope you love them too. I have included links to products I recommend and have benefited from. I hope you do too!
Update: Since I first wrote this post, Paint That looks Like Wood, I have used MANY different products. I still love Modern Masters products, they are top quality (but not too cheap). If you are looking to duplicate this look by using less products and for less, I highly recommend you try Debi’s Design Diary DIY Paint, Dark and Decrepit Liquid Patina and Crystal Clear Liquid Patina. You can tint the Clear Patina to be used like a glaze with inexpensive acrylic paints. You can get the same faux look with DIY Paint using these products, and they are 100% Natural.
I have done this finish dozens of time with dozens of variations. Have fun with it, and if you mess up? Just Paint over it and start over! Remember, wood grain looks different all the time, your faux wood is just nature’s way of looking natural! You can use Dark & Decrepit Patina from DIY Paint to look like Stain as well!
Do you remember last week I gave you this teaser?
Today, I am spilling the beans (or glaze), on how you can do this trick too. I need to begin by telling you this technique is a medium/somewhat skilled level, if a painting scale of skills existed. But don’t worry, with some practice, you can do this technique anywhere and on any surface. If you haven’t worked with glaze before, you might want to start by just familiarizing yourself with how it works, feels. Try antiquing something with glaze, and then adding another darker glaze to deepen the color, you will get the hang of this technique in no time.
Pretty soon you will want to paint all kinds of things to look like wood.
Let’s get started, time to gather your materials:
To paint ANYTHING look like real wood…. let’s start with the products
I use Modern Masters products for this technique, they are high quality and the products are concentrated so I end up using less.
NOTE: If you are painting a surface where water where will be present, I recommend starting with two coats of an oil based primer, I like Zinnser. Follow this with a light brown standard paint, to make your “base color”.
TIP: You can paint over an oil based primer with water based paints and glazes, but not vice versa. Make sense?
- Modern Masters Dead Flat Varnish, or Glidden Polycrylic in flat, or very low sheen
- *Foam roller, or old paint brush
- *High quality paint brush (I like Wooster Short Cut for this Job)
- Glazing medium (cream)
- *Tobacco Brown colorant (or warm wood acryclic paint color)
- Aged Mahogany colorant (or similar acrylic paint color)
- Van Dyke Brown or Coffee Bean Brown (this is a very dark brown color)
- Cheese cloths, CLICK HERE for best price, be sure to get UNBLEACHED, cut in half, and wadded up to look like a “pom pom”
- Chip brushes, 2″, 3″, or 4″ (depending on the size of your piece)
1.Using the foam roller, apply varnish to a clean, lightly sanded surface. Using the high quality paint brush, lay off the varnish in the direction of the grain.
2.When 1st step is dry, prepare your glaze by making a mixture of TB colorant by a 1:6 ratio with glaze. Depending on how big of a piece you are glazing, start by making a small amount, you can always make more.
3. Using a chip brush, apply Tobacco Brown glaze all over surface, generally following the grain, (or if there is none, in the same direction). While this is still wet, apply your Aged Mahogany colorant straight out of the bottle. I like to pour some onto a paper plate and then use a chip brush to (dab it on). It should look like this when you are finished with this step.
4.Now Use your cheesecloth Pompom to pull the glaze in the direction of the grain. The pompom will absorb the excess glaze and softens the look. When your cheesecloth is loaded up with glaze, you can use it to apply glaze to the sides and details. Also, just sort of re”pompom” it to use a dryer section, and continue doing so until your cheese cloth is all used. Use your chip brush to pick up the excess glaze that may have settled in corners and grooves.
5. Prepare your next layer of glaze by using a mixture of the Van Dyke Brown (or very dark brown) in a 1:1 to ratio. This is a very strong mixture, if you want your wood to be lighter, use more glaze to colorant ratio. Apply Dark Brown glaze with a chip brush in the same way you did the first layer. If you are doing a cabinet door, start with the middle, and work your way to edges. Again, soften and “remove” excess glaze with a Cheesecloth “pompom”, following with a chip brush like you did in step #4.
***Optional step*** If you desire a richer, darker look, you can experiment by repeating the first step, just by adding another layer of the Tobacco Brown glaze, and then when dry, another layer of the Dark brown glaze.
6. You can decide to leave your finish as is, or you can take this optional step. When glaze is completely dry, use some of your dark brown colorant straight from the bottle. (Again, I like to pour it onto a paper plate). You can apply some to the edges, using a chip brush, and randomly throughout your piece to “darken” the wood. Use a rag to “blend” the colorant.
8. When you have achieved the desired look, seal with protectant of your choice. I have used wax or a clear coat, or nothing, depending on where my piece will be used. Both will work beautifully with this finish.
Tip: This is one of my favorite glazing “tricks”. You can try this on just about any surface. If you are painting a surface that is not easy to paint, i.e. laminate, etc., then it is a must that you begin with a high adhesive primer.
Here is the kitchen table I did, completely “glazed over”
Close up of corner:
One more note…..the chairs were black with the same fakey wood on the seats. I used my Fuji Mini Mite Sprayer to paint out the chairs and the table base with Sherwin Williams Tricorn Black in an outdoor paint they carry called “Resilience”. I don’t usually use an exterior paint for indoor use, but this family has small children, entertains often, and I decided to go with something that would hold up to all kinds of wear and tear, and lots of wiping down!
The wonderful thing about this technique is the endless choices of wood tones you can come up with. Once you get comfortable with this technique, you can begin experimenting with all different colors of glaze and colorants. Here are some other samples of work I have done using this technique:
This nightstand top was MDF and I needed it to match the stained tall boy that was solid wood:
This bathroom was honey colored Oak. The owner’s master bedroom was all Cherry Stained wood, I added more red tones using more Aged Mahogany to achieve this look:
This bathroom had all white laminate cupboards and did not match the English Country Style of the rest of the Decor. I used less red and dark tones to achieve this look:
This was a large, very light colored built in Oak cabinet. It didn’t suit the new owner’s tastes. Instead of stripping and staining the entire piece. (which would have been very long, laborious, and EXPENSIVE!), I used my glazed wood technique. The new owner’s were delighted, they had a rich, dark, built in, for a fraction of the cost and time it would have taken to strip and stain the entire piece.
Hopefully I inspired you to go paint your own wood on some unsuspecting furniture! It is really fun to experiment with this technique. I would love to hear from you if you have more questions, or even better, see your results!
Want to see more ways to paint a wood look using different and more accessible products? Check out these posts: